Function: This property sets the current LCD Mode for the tablet. The tablet is put
into this mode as well.
Mode 0 - No LCD Tablet: No LCD commands are sent to the
tablet.
Mode 1 - Capture Default: CTRL-D is sent to the tablet. This clears
the tablet and sets capture mode
to be active with Autoerase in the tablet.
Mode 2 - Capture Ink: CTRL-T is sent to the tablet. This puts the
tablet in persistent ink capture mode
where the tablet doesn't automatically
clear the display.
Mode 3 - Capture Ink Inverted: CTRL-I is sent to the tablet. Signature
ink is displayed inverted against a
suitable dark background set using
the Graphic functions. Autoerase in the
tablet is disabled.
Arguments: Long:
Mode 0, 1, 2, 3 as defined above.
Return Value: Void.
Remarks: If TabletState is 1, the mode command is sent to the tablet immediately.
If TabletState is 0, then this inking mode command is sent when
the tablet state is next set to 1. When LCDWrite functions or
LCDRefresh() are called, and tablet state is 1, the mode will
automatically be set after completing the Write or Refresh function.
_____________________________________________________________________
Copyright 1995 - 2005, Topaz Systems, Inc. All Rights Reserved, Patent Pending
Topaz Systems, Inc., 650 Cochran Street, Unit 6, Simi Valley, CA, USA, 93065
Phone: 805 520-8282 Fax: 805 520-0867 www.topazsystems.com